First off, we would like to congratulate you on your Oskart 1/2 scale RC go kart purchase. You are now the proud owner of the ONLY high quality engineered 1/2 scale RC Kart in the world!
Before using your Oskart for the first time, please follow these instructions:
1 - Hold the pilot and seat it on the bracket.
2 - Fasten glove elastics to the larger holes on the steering wheel . Place feet on heel stopper and strap boots to the pedals.
3 - Make sure the battery pack (LiPo*) is fully charged ( at least 2 hours charge time).
4 - Mix fuel (93+ octanes) with 32:1 two Stroke competition Oil (for 1 gal. of fuel use 4 oz.of oil). Unscrew the fuel tank cap. Fill fuel tank with this mixture, paying attention not to spill over the kart plastics. Screw fuel cap on tank and tighten.
5 - Connect battery plug to on/off button wire.
6 - Turn the radio on.
7 - Turn the kart on/off button to the position "on"
8 - Place the choke lever on the position "closed"
9 - Pull start until you hear the engine start.
10. Wait 15 seconds and place the choke lever on the position "open"
11. Have fun, lots of fun!
12. BE CAREFUL AND DRIVE SAFELY
· LiPo Safety Instructions
Please remember not to leave LiPo totally discharged nor totally charged if you intend not using it for at least one week.
t This is not a toy. This is a high performance RC model and must be treated with care and respect. It is user’s (your) responsibility to operate this product safely. It is necessary to be over 14 years of age to operate this model. It is the parents “guardians” responsibility to ensure minors receive appropriate guidance before and during kart operation.
Disclaimer: Oskart USA assumes no liability in neglect, misuse, property damage or bodily injury of the Oskart 1/2 scale go kart.